PartsTable
Technical Data Sheet
Download PDF

EU23622 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

EU23622: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include diameter: 0.2183 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT FILLISTER, undercut_width: 0.087 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, first_end_style: CHAMFERED, hardness_rating: 29.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-856-0734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EU23622
NSN: 5315-00-856-0734
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
diameter0.2183 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT FILLISTER
undercut_width0.087 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
first_end_styleCHAMFERED
hardness_rating29.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
style_designatorGROOVE
pin_head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
under_head_length0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
undercut_diameter0.143 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
first_end_taper_angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NSN5315-00-856-0734
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: EU23622 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.087 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.143 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 29.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.087 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.143 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
UNDER HEAD LENGTH0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
HARDNESS RATING29.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
DIAMETER0.2183 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM IN
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
6860597Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy EU23622?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EU23622?
EU23622 is a PIN,GROOVED,HEADED.
What parts can replace EU23622?
There is 1 known substitute for EU23622: 6860597. Substitute compatibility should be verified for your specific system.
What is the NSN for EU23622?
EU23622 is cataloged in the U.S. Government catalog under NSN 5315-00-856-0734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EU23622

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.