PartsTable
Technical Data Sheet
Download PDF

ETJ74868-9D — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

ETJ74868-9D: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 RETAINER, bore_diameter: 3.1184 INCHES NOMINAL IN, alignment_type: RIGID, inner_ring_width: 2.1850 INCHES NOMINAL IN, outer_ring_width: 1.6500 INCHES NOMINAL IN, special_features: INNER RING EXTENDS ON ONE SIDE OF OUTER RING,FLANGED OUTER RING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-829-9848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ETJ74868-9D
NSN: 3110-00-829-9848
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 RETAINER
bore_diameter3.1184 INCHES NOMINAL IN
alignment_typeRIGID
inner_ring_width2.1850 INCHES NOMINAL IN
outer_ring_width1.6500 INCHES NOMINAL IN
special_featuresINNER RING EXTENDS ON ONE SIDE OF OUTER RING,FLANGED OUTER RING
overall_outside_diameter3.9504 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
NSN3110-00-829-9848
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: ETJ74868-9D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 1.6500 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 3.9504 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
•
BORE DIAMETER: 3.1184 INCHES NOMINAL IN
•
MATERIAL: STEEL OUTER RING
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH1.6500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.9504 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESINNER RING EXTENDS ON ONE SIDE OF OUTER RING,FLANGED OUTER RING
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
BORE DIAMETER3.1184 INCHES NOMINAL IN
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL COMP 1010 RETAINER
MATERIALSTEEL ROLLER
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
A02RS253-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy ETJ74868-9D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ETJ74868-9D?
ETJ74868-9D is a BEARING,ROLLER,NEEDLE.
What parts can replace ETJ74868-9D?
There is 1 known substitute for ETJ74868-9D: A02RS253-1. Substitute compatibility should be verified for your specific system.
What is the NSN for ETJ74868-9D?
ETJ74868-9D is cataloged in the U.S. Government catalog under NSN 3110-00-829-9848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ETJ74868-9D