PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ES7084-52
ES7084-52 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, overall_length: 5.062 INCHES NOMINAL IN, handle_clearance: 1.440 INCHES NOMINAL IN, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF, material_document_and_classification: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-024-7156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ES7084-52
NSN: 5340-01-024-7156
FSC: 5340
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
overall_length5.062 INCHES NOMINAL IN
handle_clearance1.440 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.562 INCHES NOMINAL IN
NSN5340-01-024-7156
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ES7084-52 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
HANDLE CLEARANCE: 1.440 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
THREAD SERIES DESIGNATORUNF
HANDLE CLEARANCE1.440 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
NOMINAL THREAD SIZE0.190 INCHES IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.562 INCHES NOMINAL IN
OVERALL LENGTH5.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2N4168Interchangeable
interchangeable cross-reference
interchangeable
2N4168AInterchangeable
interchangeable cross-reference
interchangeable
19052Interchangeable
interchangeable cross-reference
interchangeable
16219Interchangeable
interchangeable cross-reference
interchangeable
19052AInterchangeable
interchangeable cross-reference
interchangeable
MS35206-235Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ES7084-52?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ES7084-52?
ES7084-52 is a HANDLE,BOW.
What parts can replace ES7084-52?
There are 14 known substitutes for ES7084-52: 2N4168, 2N4168A, 19052 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ES7084-52?
ES7084-52 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-024-7156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ES7084-52

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026