PartsTable
Technical Data Sheet
Download PDF

ES6252-1 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ES6252-1: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, thread_class: 2A A, overall_length: 4.250 INCHES NOMINAL IN, handle_clearance: 1.717 INCHES NOMINAL IN, special_features: HINGED FOR FOLDING, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-373-0160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ES6252-1
NSN: 5340-00-373-0160
FSC: 5340 — Hardware, Commercial
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
thread_class2A A
overall_length4.250 INCHES NOMINAL IN
handle_clearance1.717 INCHES NOMINAL IN
special_featuresHINGED FOR FOLDING
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.312 INCHES IN
end_item_identificationW/S:AIRCRAFT, PROWLER EA-6B
mounting_facility_length0.531 INCHES NOMINAL IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-373-0160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ES6252-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
•
MOUNTING FACILITY LENGTH: 0.531 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
HANDLE CLEARANCE: 1.717 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
MOUNTING FACILITY LENGTH0.531 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.312 INCHES IN
HANDLE CLEARANCE1.717 INCHES NOMINAL IN
SPECIAL FEATURESHINGED FOR FOLDING
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
362385-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
94-415-1008-01-00-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ES6252-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ES6252-1?
ES6252-1 is a HANDLE,BOW.
What parts can replace ES6252-1?
There are 2 known substitutes for ES6252-1: 362385-2, 94-415-1008-01-00-00. Substitute compatibility should be verified for your specific system.
What is the NSN for ES6252-1?
ES6252-1 is cataloged in the U.S. Government catalog under NSN 5340-00-373-0160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ES6252-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.