PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ES3323-3-2
ES3323-3-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include color: BLACK HANDLE, material: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL, overall_length: 4.813 INCHES NOMINAL IN, handle_clearance: 1.187 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-155-4808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ES3323-3-2
NSN: 5340-00-155-4808
FSC: 5340
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
colorBLACK HANDLE
materialALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL
overall_length4.813 INCHES NOMINAL IN
handle_clearance1.187 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/3,T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/8,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/9,T5 FED SPEC 3RD MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.500 INCHES NOMINAL IN
NSN5340-00-155-4808
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ES3323-3-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF
•
SURFACE TREATMENT: ANODIZE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
COLOR: BLACK HANDLE
•
MATERIAL: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3,T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/8,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/9,T5 FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
MOUNTING FACILITY QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF
SURFACE TREATMENTANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
COLORBLACK HANDLE
OVERALL LENGTH4.813 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3,T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/8,T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/9,T5 FED SPEC 3RD MATERIAL RESPONSE OVERALL
MOUNTING FACILITY QUANTITY2
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.187 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
55-44Upgraded Successor
successor cross-reference
successor
A90J241Upgraded Successor
successor cross-reference
successor
90-10-26-260 FRUpgraded Successor
successor cross-reference
successor
RELEASE664Interchangeable
interchangeable cross-reference
interchangeable
8SInterchangeable
interchangeable cross-reference
interchangeable
9042Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ES3323-3-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ES3323-3-2?
ES3323-3-2 is a HANDLE,BOW.
What parts can replace ES3323-3-2?
There are 23 known substitutes for ES3323-3-2: 55-44, A90J241, 90-10-26-260 FR and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ES3323-3-2?
ES3323-3-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-155-4808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ES3323-3-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026