ERH10 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

ERH10: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.438 INCHES NOMINAL IN, body_height: 0.406 INCHES NOMINAL IN, body_length: 0.750 INCHES NOMINAL IN, cubic_measure: 0.092 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCASED. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-140-5647, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ ERH10

NSN: 5905-00-140-5647
NIINs: 001405647, 010654054
FSC: 5905 — Resistor
CAGE: 91637 — VISHAY DALE ELECTRONICS, LLC DIV VISHAY AMERICAS (USA)

SPECIFICATIONS

body_width	0.438 INCHES NOMINAL IN
body_height	0.406 INCHES NOMINAL IN
body_length	0.750 INCHES NOMINAL IN
cubic_measure	0.092 CUBIC INCHES
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
terminal_length	0.312 INCHES NOMINAL IN
style_designator	AXIAL TERMINAL (S)
mounting_hole_size	0.085 INCHES NOMINAL IN
electrical_resistance	0.016 OHMS
reliability_indicator	NOT ESTABLISHED
unpackaged_unit_weight	8.0 GRAMS G
NSN	5905-00-140-5647

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -50.0 TO 50.0

•

ELECTRICAL RESISTANCE: 5.110 OHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.094 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.562 INCHES NOMINAL IN

•

TERMINAL LENGTH: 0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-50.0 TO 50.0
ELECTRICAL RESISTANCE	5.110 OHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.094 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.562 INCHES NOMINAL IN
TERMINAL LENGTH	0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
BODY WIDTH	0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
BODY HEIGHT	0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 9

MIL-R-39009/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

RH10-5-100HMS1PCReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ARH-10Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

418006-173Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-PRF-39009/1Reference document

Same NSN cross-reference

Reference document — Identification reference

RER65F5R11RSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy ERH10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ERH10?

ERH10 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace ERH10?

There are 9 known substitutes for ERH10: MIL-R-39009/1, RH10-5-100HMS1PC, ARH-10 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for ERH10?

ERH10 is cataloged in the U.S. Government catalog under NSN 5905-00-140-5647. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ERH10 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — ERH10