PartsTable
Technical Data Sheet
Download PDF

ERG220 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

ERG220: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 153.000 POUNDS MINIMUM AND 167.000 POUNDS MAXIMUM LBS, bore_diameter: 0.1875 INCHES NOMINAL IN, coil_quantity: 7-1/2, overall_width: 0.2500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-120-3074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ERG220
NSN: 3110-00-120-3074
NIINs: 001203074, 007375230
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
load_rating153.000 POUNDS MINIMUM AND 167.000 POUNDS MAXIMUM LBS
bore_diameter0.1875 INCHES NOMINAL IN
coil_quantity7-1/2
overall_width0.2500 INCHES NOMINAL IN
alignment_typeRIGID
inside_diameter1.406 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
surface_treatmentCADMIUM OVERALL
spring_free_length2.602 INCHES NOMINAL IN
spring_solid_length1.525 INCHES MAXIMUM IN
NSN3110-00-120-3074
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: ERG220 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.3438 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.3438 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.1875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
8979-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
1100-11-86Reference document
Same NSN cross-reference
Reference document — Secondary reference
CAZX2-1-713857Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy ERG220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ERG220?
ERG220 is a BEARING,ROLLER,NEEDLE.
What parts can replace ERG220?
There are 3 known substitutes for ERG220: 8979-1, 1100-11-86, CAZX2-1-713857. Substitute compatibility should be verified for your specific system.
What is the NSN for ERG220?
ERG220 is cataloged in the U.S. Government catalog under NSN 3110-00-120-3074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ERG220