PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ER824J080804
ER824J080804 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SLEEVE,CLINCH,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 316 OVERALL, leg_length: 1.273 INCHES NOMINAL FIRST END IN, seat_angle: 12.0 DEGREES FIRST END, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL BOSS THIRD END, connection_style: FLARELESS (TUBE) SECOND END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-195-6020, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ER824J080804
NSN: 4730-01-195-6020
FSC: 4730
CAGE: 14798 — DESIGNED METAL CONNECTIONS INC DBA PERMASWAGE USA DIV PERMASWAGE, A PCC COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OR STEEL COMP 316 OVERALL
leg_length1.273 INCHES NOMINAL FIRST END IN
seat_angle12.0 DEGREES FIRST END
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL BOSS THIRD END
connection_styleFLARELESS (TUBE) SECOND END
surface_treatmentPASSIVATE OVERALL
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.750 INCHES FIRST END IN
maximum_operating_temp275.0 FAHRENHEIT SINGLE RESPONSE DEGF
media_for_which_designedHYDRAULIC FLUID FIRST RESPONSE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
NSN4730-01-195-6020
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: ER824J080804 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION TYPE: THREADED EXTERNAL BOSS THIRD END
•
LEG LENGTH: 1.273 INCHES NOMINAL FIRST END IN
•
CONNECTION STYLE: FLARELESS (TUBE) FIRST END
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES SECOND END IN
•
MEDIA FOR WHICH DESIGNED: AERONAUTICAL FLUID SECOND RESPONSE
•
SEAT ANGLE: 12.0 DEGREES FIRST END
•
OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION TYPETHREADED EXTERNAL BOSS THIRD END
LEG LENGTH1.273 INCHES NOMINAL FIRST END IN
CONNECTION STYLEFLARELESS (TUBE) FIRST END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES SECOND END IN
MEDIA FOR WHICH DESIGNEDAERONAUTICAL FLUID SECOND RESPONSE
SEAT ANGLE12.0 DEGREES FIRST END
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
SURFACE TREATMENTPASSIVATE OVERALL
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
AS21922-6Interchangeable
interchangeable cross-reference
interchangeable
MS21922-6Interchangeable
interchangeable cross-reference
interchangeable
MS21922-8Interchangeable
interchangeable cross-reference
interchangeable
AS21922-8Interchangeable
interchangeable cross-reference
interchangeable
AS81280Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-18280EInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ER824J080804?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ER824J080804?
ER824J080804 is a SLEEVE,CLINCH,TUBE FITTING.
What parts can replace ER824J080804?
There are 11 known substitutes for ER824J080804: AS21922-6, MS21922-6, MS21922-8 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ER824J080804?
ER824J080804 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-195-6020. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ER824J080804

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026