PartsTable
Technical Data Sheet
PartsTable / COMPONENT / EP18196PC5
EP18196PC5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.219 INCHES NOMINAL IN, housing_bore_diameter: 2.000 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-245-5411, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EP18196PC5
NSN: 5330-00-245-5411
FSC: 5330
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.219 INCHES NOMINAL IN
housing_bore_diameter2.000 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1000 FEET PER MINUTE FT
NSN5330-00-245-5411
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EP18196PC5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.219 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SEAL WIDTH0.219 INCHES NOMINAL IN
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
14857Interchangeable
interchangeable cross-reference
interchangeable
199G116STYLE1HDInterchangeable
interchangeable cross-reference
interchangeable
P67745Interchangeable
interchangeable cross-reference
interchangeable
GSA296Interchangeable
interchangeable cross-reference
interchangeable
BP2057Interchangeable
interchangeable cross-reference
interchangeable
204-19852-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy EP18196PC5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EP18196PC5?
EP18196PC5 is a SEAL,PLAIN ENCASED.
What parts can replace EP18196PC5?
There are 13 known substitutes for EP18196PC5: 14857, 199G116STYLE1HD, P67745 and 10 more. Substitute compatibility should be verified for your specific system.
Is EP18196PC5 still available?
EP18196PC5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EP18196PC5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026