PartsTable
Technical Data Sheet
PartsTable / COMPONENT / EON-002000-03-01-1
EON-002000-03-01-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, outside_diameter: 2.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.875 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-559-8539, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EON-002000-03-01-1
NSN: 5330-00-559-8539
FSC: 5330
CAGE: 04319 — PARKER-HANNIFIN CORPORATION DBA PARKER HANNIFIN ADVANCED PRODUCTS CO DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
outside_diameter2.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.875 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleHOLLOW
NSN5330-00-559-8539
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EON-002000-03-01-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: STEEL COMP 304 OVERALL
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEHOLLOW
SURFACE TREATMENTPASSIVATE OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALSTEEL COMP 304 OVERALL
OUTSIDE DIAMETER2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
20003-1Interchangeable
interchangeable cross-reference
interchangeable
312A1Interchangeable
interchangeable cross-reference
interchangeable
312-0001Interchangeable
interchangeable cross-reference
interchangeable
A2000AInterchangeable
interchangeable cross-reference
interchangeable
20500048-1Interchangeable
interchangeable cross-reference
interchangeable
7700721-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy EON-002000-03-01-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EON-002000-03-01-1?
EON-002000-03-01-1 is a GASKET.
What parts can replace EON-002000-03-01-1?
There are 13 known substitutes for EON-002000-03-01-1: 20003-1, 312A1, 312-0001 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for EON-002000-03-01-1?
EON-002000-03-01-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-559-8539. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EON-002000-03-01-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026