PartsTable
Technical Data Sheet
EON-001250-02-03-1 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 OVERALL, outside_diameter: 1.250 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.162 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, cross-sectional_thickness: 0.042 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-809-2595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EON-001250-02-03-1
NSN: 5330-00-809-2595
FSC: 5330
CAGE: 04319 — PARKER-HANNIFIN CORPORATION DBA PARKER HANNIFIN ADVANCED PRODUCTS CO DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 321 OVERALL
outside_diameter1.250 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.162 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
cross-sectional_thickness0.042 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
cross-sectional_shape_styleHOLLOW
NSN5330-00-809-2595
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EON-001250-02-03-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STYLE DESIGNATOR: CIRCULAR
MATERIAL: STEEL COMP 321 OVERALL
SURFACE TREATMENT: PASSIVATE OVERALL
CROSS-SECTIONAL SHAPE STYLE: HOLLOW
CROSS-SECTIONAL THICKNESS: 0.042 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
APERTURE DIAMETER: 1.162 INCHES NOMINAL IN
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
MATERIALSTEEL COMP 321 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
CROSS-SECTIONAL SHAPE STYLEHOLLOW
CROSS-SECTIONAL THICKNESS0.042 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
APERTURE DIAMETER1.162 INCHES NOMINAL IN
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
125023Interchangeable
interchangeable cross-reference
interchangeable
GPW3593Interchangeable
interchangeable cross-reference
interchangeable
VT223Interchangeable
interchangeable cross-reference
interchangeable
362-523-9013Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy EON-001250-02-03-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EON-001250-02-03-1?
EON-001250-02-03-1 is a GASKET.
What parts can replace EON-001250-02-03-1?
There are 4 known substitutes for EON-001250-02-03-1: 125023, GPW3593, VT223 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for EON-001250-02-03-1?
EON-001250-02-03-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-809-2595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EON-001250-02-03-1