PartsTable
Technical Data Sheet
Download PDF

ENG390789X — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ENG390789X: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.812 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN, housing_bore_diameter: 3.011 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.186 INCHES MINIMUM AND 2.188 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-998-5063, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ENG390789X
NSN: 5330-00-998-5063
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.812 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
housing_bore_diameter3.011 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.186 INCHES MINIMUM AND 2.188 INCHES MAXIMUM IN
NSN5330-00-998-5063
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ENG390789X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.812 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 3.011 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.186 INCHES MINIMUM AND 2.188 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.812 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.011 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.186 INCHES MINIMUM AND 2.188 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
A1205X908XSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ENG390789X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ENG390789X?
ENG390789X is a SEAL,PLAIN ENCASED.
What parts can replace ENG390789X?
There is 1 known substitute for ENG390789X: A1205X908X. Substitute compatibility should be verified for your specific system.
What is the NSN for ENG390789X?
ENG390789X is cataloged in the U.S. Government catalog under NSN 5330-00-998-5063. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ENG390789X