PartsTable
Technical Data Sheet
Download PDF

EN-5 — NUT,EYE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

EN-5: NUT,EYE.

The NUT,EYE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: EYE, nut_width: 2.562 INCHES NOMINAL IN, hole_width: 1.500 INCHES NOMINAL IN, hole_height: 1.625 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-526-0457, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EN-5
NSN: 5310-00-526-0457
FSC: 5310 — Nuts and Washers
CAGE: 5V824 — MAC LEAN-FOGG COMPANY DBA MAC LEAN FASTENERS DIV MACLEAN POWER SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleEYE
nut_width2.562 INCHES NOMINAL IN
hole_width1.500 INCHES NOMINAL IN
hole_height1.625 INCHES NOMINAL IN
thread_class2B
body_diameter1.250 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height3.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
eye_body_thickness0.542 INCHES NOMINAL IN
fabrication_methodFORGED
NSN5310-00-526-0457
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: EN-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY DIAMETER: 1.250 INCHES NOMINAL IN
•
NUT WIDTH: 2.562 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
EYE BODY THICKNESS: 0.542 INCHES NOMINAL IN
•
HOLE HEIGHT: 1.625 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
TECHNICAL CHARACTERISTICS
BODY DIAMETER1.250 INCHES NOMINAL IN
OVERALL HEIGHT3.000 INCHES NOMINAL IN
NUT WIDTH2.562 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
EYE BODY THICKNESS0.542 INCHES NOMINAL IN
HOLE HEIGHT1.625 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
HOLE WIDTH1.500 INCHES NOMINAL IN
NUT STYLEEYE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy EN-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EN-5?
EN-5 is a NUT,EYE.
What is the NSN for EN-5?
EN-5 is cataloged in the U.S. Government catalog under NSN 5310-00-526-0457. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EN-5