PartsTable
Technical Data Sheet
PartsTable / MRO / EM100-1
EM100-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.375 INCHES NOMINAL IN, body_height: 0.062 INCHES NOMINAL IN, body_length: 0.312 INCHES NOMINAL IN, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-536-6611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ EM100-1
NSN: 5340-00-536-6611
FSC: 5340
CAGE: 08730 — VEMALINE PRODUCTS INC DBA HANDLES UNLIMITED DIV HANDLES UNLIMITED (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.375 INCHES NOMINAL IN
body_height0.062 INCHES NOMINAL IN
body_length0.312 INCHES NOMINAL IN
thread_class2A A
inside_length3.625 INCHES NOMINAL IN
stock_diameter0.375 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)
terminal_length1.500 INCHES MINIMUM IN
special_featuresDETENTS FOR 2 HORIZONTAL AND 1 VERTICAL POSITION
style_designatorEYE HOOK
NSN5340-00-536-6611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EM100-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF
•
STOCK DIAMETER: 0.375 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED STUD(S)
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
SURFACE TREATMENT: ANODIZE HANDLE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
•
THREAD CLASS: 2A A
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF
STOCK DIAMETER0.375 INCHES NOMINAL IN
MOUNTING METHODTHREADED STUD(S)
NOMINAL THREAD SIZE0.375 INCHES IN
SURFACE TREATMENTANODIZE HANDLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE THREADED STUD
THREAD CLASS2A A
STYLE DESIGNATOREYE HOOK
SPECIAL FEATURESDETENTS FOR 2 HORIZONTAL AND 1 VERTICAL POSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
A05764Upgraded Successor
successor cross-reference
successor
642AS2504-4Upgraded Successor
successor cross-reference
successor
0356742Upgraded Successor
successor cross-reference
successor
SC5325-0038-5Upgraded Successor
successor cross-reference
successor
05204-24Upgraded Successor
successor cross-reference
successor
12Z7003-6334Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy EM100-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EM100-1?
EM100-1 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace EM100-1?
There are 25 known substitutes for EM100-1: A05764, 642AS2504-4, 0356742 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for EM100-1?
EM100-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-536-6611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EM100-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026