EL21442-1PC54: GASKET.
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 0.438 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.125 INCHES NOMINAL IN, elongation_percentage: 300 MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-008-2130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | RUBBER CHLOROPRENE CLASS CR OVERALL |
| hardness_rating | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL |
| outside_diameter | 0.438 INCHES NOMINAL IN |
| style_designator | CIRCULAR |
| aperture_diameter | 0.125 INCHES NOMINAL IN |
| elongation_percentage | 300 MAXIMUM |
| special_test_features | SPECIAL QUALITY CONTROL TESTING |
| cross-sectional_thickness | 0.031 INCHES NOMINAL IN |
| cross-sectional_shape_style | SOLID SINGLE OR COMPOSITION |
| material_document_and_classification | MIL-G-1149,TY 1,CL 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| reference_number_differentiating_characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| NSN | 5330-00-008-2130 |
| CROSS-SECTIONAL THICKNESS | 0.031 INCHES NOMINAL IN |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL |
| STYLE DESIGNATOR | CIRCULAR |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-1149,TY 1,CL 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| OUTSIDE DIAMETER | 0.438 INCHES NOMINAL IN |
| APERTURE DIAMETER | 0.125 INCHES NOMINAL IN |
| ELONGATION PERCENTAGE | 300 MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |