PartsTable
Technical Data Sheet
PartsTable / COMPONENT / EJ-10035
EJ-10035 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.250 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, overall_length: 1.500 INCHES NOMINAL IN, shear_strength: 60000 SINGLE POUNDS PER SQUARE INCH, style_designator: PLAIN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-006-2365, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EJ-10035
NSN: 5315-00-006-2365
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.250 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
shear_strength60000 SINGLE POUNDS PER SQUARE INCH
style_designatorPLAIN
starting_edge_shapeSTRAIGHT
nondefinitive_spec/std_data2 TYPE AND 2 STYLE AND C GRADE
material_document_and_classificationAISI 1018 THRU 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-006-2365
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: EJ-10035 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHEAR STRENGTH: 60000 SINGLE POUNDS PER SQUARE INCH
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1018 THRU 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: PLAIN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 2 STYLE AND C GRADE
TECHNICAL CHARACTERISTICS (FLIS)
SHEAR STRENGTH60000 SINGLE POUNDS PER SQUARE INCH
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1018 THRU 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL HEIGHT0.250 INCHES NOMINAL IN
OVERALL LENGTH1.500 INCHES NOMINAL IN
STYLE DESIGNATORPLAIN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 2 STYLE AND C GRADE
STARTING EDGE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MS20068-173Interchangeable
Same NIIN cross-reference
interchangeable
00K220Interchangeable
Same NIIN cross-reference
interchangeable
EJ41136 ITEM 7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy EJ-10035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EJ-10035?
EJ-10035 is a KEY,MACHINE.
What parts can replace EJ-10035?
There are 3 known substitutes for EJ-10035: MS20068-173, 00K220, EJ41136 ITEM 7. Substitute compatibility should be verified for your specific system.
Is EJ-10035 still available?
EJ-10035 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EJ-10035

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026