PartsTable
Technical Data Sheet
PartsTable / COMPONENT / EE35716
EE35716 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 2.622 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN, sealing_element_style: VERTICAL-ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-156-3074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EE35716
NSN: 5330-00-156-3074
FSC: 5330
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter2.622 INCHES MINIMUM AND 2.624 INCHES MAXIMUM IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter1.747 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
material_document_and_classificationB-86 FSCM 81596 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT A
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-156-3074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EE35716 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: B-86 FSCM 81596 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT B
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONB-86 FSCM 81596 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT B
MATERIAL DOCUMENT AND CLASSIFICATIONB-86 FSCM 81596 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT A
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
CASE STYLESQUARE
SEALING ELEMENT STYLEVERTICAL-ANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER1.747 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
RC42GF511JSInterchangeable
interchangeable cross-reference
interchangeable
10120423Interchangeable
interchangeable cross-reference
interchangeable
410070Interchangeable
interchangeable cross-reference
interchangeable
472185Interchangeable
Same NIIN cross-reference
interchangeable
00044Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy EE35716?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EE35716?
EE35716 is a SEAL,PLAIN ENCASED.
What parts can replace EE35716?
There are 5 known substitutes for EE35716: RC42GF511JS, 10120423, 410070 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for EE35716?
EE35716 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-156-3074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EE35716

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026