PartsTable
Technical Data Sheet
PartsTable / COMPONENT / EE-5
EE-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, design_type: FRICTION, bore_diameter: 0.6250 INCHES NOMINAL IN, overall_width: 0.2813 INCHES NOMINAL IN, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-208-2195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EE-5
NSN: 5340-00-208-2195
FSC: 5340
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
design_typeFRICTION
bore_diameter0.6250 INCHES NOMINAL IN
overall_width0.2813 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
overall_diameter0.562 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
inside_diameter_length0.562 INCHES NOMINAL IN
overall_outside_diameter1.3750 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN5340-00-208-2195
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EE-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.562 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
INSIDE DIAMETER LENGTH: 0.562 INCHES NOMINAL IN
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 0.312 INCHES IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.562 INCHES NOMINAL IN
DESIGN TYPEFRICTION
INSIDE DIAMETER LENGTH0.562 INCHES NOMINAL IN
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED0.312 INCHES IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC, POLYETHYLENE (PP)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
S5Interchangeable
interchangeable cross-reference
interchangeable
177039-75Interchangeable
interchangeable cross-reference
interchangeable
12Z336-6Interchangeable
interchangeable cross-reference
interchangeable
10117300Interchangeable
Same NIIN cross-reference
interchangeable
410136-2Interchangeable
Same NIIN cross-reference
interchangeable
N215-EC5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy EE-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EE-5?
EE-5 is a BEARING,BALL,ANNULAR.
What parts can replace EE-5?
There are 9 known substitutes for EE-5: S5, 177039-75, 12Z336-6 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for EE-5?
EE-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-208-2195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EE-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026