PartsTable
Technical Data Sheet
Download PDF

EDN37P8 — PIN,DRIVE,GUIDED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

EDN37P8: PIN,DRIVE,GUIDED.

The PIN,DRIVE,GUIDED is a the manufacturer industrial component. Key specifications include material: STEEL SHANK, shank_length: 1.500 INCHES NOMINAL IN, overall_length: 1.625 INCHES NOMINAL IN, shank_diameter: 0.145 INCHES NOMINAL IN, special_features: KNURLED SHANK, style_designator: GUIDED OR POWDER ACTUATED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-174-3699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EDN37P8
NSN: 5315-00-174-3699
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 11239 — HILTI INC (USA)
SPECIFICATIONS
materialSTEEL SHANK
shank_length1.500 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
shank_diameter0.145 INCHES NOMINAL IN
special_featuresKNURLED SHANK
style_designatorGUIDED OR POWDER ACTUATED
material_thickness0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
washer_outside_diameter0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
shank_length_under_washer0.313 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
material_for_which_designedSTEEL
NSN5315-00-174-3699
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: EDN37P8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.145 INCHES NOMINAL IN
•
WASHER OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
SHANK LENGTH: 1.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GUIDED OR POWDER ACTUATED
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
SHANK LENGTH UNDER WASHER: 0.313 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.145 INCHES NOMINAL IN
WASHER OUTSIDE DIAMETER0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
SHANK LENGTH1.500 INCHES NOMINAL IN
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
OVERALL LENGTH1.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
SHANK LENGTH UNDER WASHER0.313 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
SPECIAL FEATURESKNURLED SHANK
MATERIALSTEEL SHANK
MATERIALPLASTIC RING
SUBSTITUTES & CROSS-REFERENCES 1
DN37Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy EDN37P8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EDN37P8?
EDN37P8 is a PIN,DRIVE,GUIDED.
What parts can replace EDN37P8?
There is 1 known substitute for EDN37P8: DN37. Substitute compatibility should be verified for your specific system.
What is the NSN for EDN37P8?
EDN37P8 is cataloged in the U.S. Government catalog under NSN 5315-00-174-3699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EDN37P8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.