PartsTable
Technical Data Sheet
PartsTable / COMPONENT / EDG-0188-3
EDG-0188-3 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The NIPPLE,TUBE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, connection_type: THREADED EXTERNAL PIPE SECOND END, connection_style: GRIPPING (HOSE) FIRST END, style_designator: CENTER WRENCHING FACILITY, operating_pressure: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_thread_size: 0.500 INCHES SECOND END IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-478-5134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EDG-0188-3
NSN: 4730-01-478-5134
FSC: 4730
CAGE: 1D1T5 — EXCELL TECHNOLOGIES INTERNATIONAL CORPORATION DBA EXCELTEC (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
connection_typeTHREADED EXTERNAL PIPE SECOND END
connection_styleGRIPPING (HOSE) FIRST END
style_designatorCENTER WRENCHING FACILITY
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.500 INCHES SECOND END IN
maximum_operating_temp212.0 FAHRENHEIT SINGLE RESPONSE DEGF
nominal_overall_length1.870 INCHES IN
end_item_identificationPWEDG FOR NAVAL SURFACE SHIPS
media_for_which_designedWATER-OIL-GAS SINGLE RESPONSE
reduced_passage_nominal_inside_diameter0.375 INCHES ALL ENDS IN
nominal_outside_diameter_tube_accommodated0.500 INCHES FIRST END IN
NSN4730-01-478-5134
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: EDG-0188-3 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER WRENCHING FACILITY
•
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED: 0.062 INCHES FIRST END IN
•
MATERIAL: PLASTIC POLYPROPYLENE OVERALL
•
REDUCED PASSAGE NOMINAL INSIDE DIAMETER: 0.375 INCHES ALL ENDS IN
•
NOMINAL OVERALL LENGTH: 1.870 INCHES IN
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES FIRST END IN
•
MEDIA FOR WHICH DESIGNED: WATER-OIL-GAS SINGLE RESPONSE
•
OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCENTER WRENCHING FACILITY
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED0.062 INCHES FIRST END IN
MATERIALPLASTIC POLYPROPYLENE OVERALL
REDUCED PASSAGE NOMINAL INSIDE DIAMETER0.375 INCHES ALL ENDS IN
NOMINAL OVERALL LENGTH1.870 INCHES IN
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES FIRST END IN
MEDIA FOR WHICH DESIGNEDWATER-OIL-GAS SINGLE RESPONSE
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
END ITEM IDENTIFICATIONPWEDG FOR NAVAL SURFACE SHIPS
CONNECTION STYLEGRIPPING (HOSE) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
0188-3Interchangeable
interchangeable cross-reference
interchangeable
WF2SSInterchangeable
interchangeable cross-reference
interchangeable
03Y61TM-0250 FIInterchangeable
interchangeable cross-reference
interchangeable
PJ020404Interchangeable
interchangeable cross-reference
interchangeable
P4ME4Interchangeable
interchangeable cross-reference
interchangeable
03Y61TM-0188 FIInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy EDG-0188-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EDG-0188-3?
EDG-0188-3 is a NIPPLE,TUBE.
What parts can replace EDG-0188-3?
There are 13 known substitutes for EDG-0188-3: 0188-3, WF2SS, 03Y61TM-0250 FI and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for EDG-0188-3?
EDG-0188-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-478-5134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EDG-0188-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026