PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ECC-5
ECC-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-567-2538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ECC-5
NSN: 5340-01-567-2538
FSC: 5340
CAGE: 63590 — SPC TECHNOLOGY - NEWARK (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_diameter0.312 INCHES NOMINAL IN
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter0.310 INCHES NOMINAL IN
end_item_identificationAN/WLD-1(V) REMOTE MINE HUNTING SYSTEM
center_to_center_distance_between_loop_and_mounting_hole0.453 INCHES NOMINAL IN
NSN5340-01-567-2538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ECC-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.453 INCHES NOMINAL IN
•
MATERIAL DIAMETER: 0.312 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONAN/WLD-1(V) REMOTE MINE HUNTING SYSTEM
MATERIALPLASTIC OVERALL
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.453 INCHES NOMINAL IN
MATERIAL DIAMETER0.312 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.310 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
80P6787Interchangeable
interchangeable cross-reference
interchangeable
10N8677Interchangeable
interchangeable cross-reference
interchangeable
10N9281Interchangeable
IBM Service Processor Card
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ECC-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ECC-5?
ECC-5 is a CLAMP,LOOP.
What parts can replace ECC-5?
There are 3 known substitutes for ECC-5: 80P6787, 10N8677, 10N9281. Substitute compatibility should be verified for your specific system.
What is the NSN for ECC-5?
ECC-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-567-2538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ECC-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026