PartsTable
Technical Data Sheet
Download PDF

EC12460246-3B1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

EC12460246-3B1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 0.44 RADIANS NOMINAL, first_leg_style: SQUARE, first_leg_length: 2.000 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 1.600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-433-2721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EC12460246-3B1
NSN: 5340-01-433-2721
FSC: 5340 — Hardware, Commercial
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle0.44 RADIANS NOMINAL
first_leg_styleSQUARE
first_leg_length2.000 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.600 INCHES NOMINAL IN
first_leg_thickness0.1793 INCHES NOMINAL IN
second_leg_thickness0.1793 INCHES NOMINAL IN
first_leg_hole_arrangement_styleONE HOLE
NSN5340-01-433-2721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EC12460246-3B1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 0.44 RADIANS NOMINAL
•
SECOND LEG LENGTH: 1.600 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
SECOND LEG THICKNESS: 0.1793 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.1793 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE0.44 RADIANS NOMINAL
SECOND LEG LENGTH1.600 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
SECOND LEG THICKNESS0.1793 INCHES NOMINAL IN
FIRST LEG THICKNESS0.1793 INCHES NOMINAL IN
FIRST LEG LENGTH2.000 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 2
5340PL0782545Reference document
Same NSN cross-reference
Reference document — Informative reference only
6002346Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy EC12460246-3B1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EC12460246-3B1?
EC12460246-3B1 is a BRACKET,ANGLE.
What parts can replace EC12460246-3B1?
There are 2 known substitutes for EC12460246-3B1: 5340PL0782545, 6002346. Substitute compatibility should be verified for your specific system.
What is the NSN for EC12460246-3B1?
EC12460246-3B1 is cataloged in the U.S. Government catalog under NSN 5340-01-433-2721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EC12460246-3B1