PartsTable
Technical Data Sheet
Download PDF

EBV-S2-30-0002-18 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

EBV-S2-30-0002-18: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, special_features: O-RING SIZE 2-223, center_hole_diameter: 1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM IN, cross-sectional_height: 0.134 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: ACTUATOR, 3" BALL VALVE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-521-8991, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
EBV-S2-30-0002-18
NSN: 5331-01-521-8991
FSC: 5331 — O-ring
CAGE: 0AZ22 — B N L INDUSTRIES INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
special_featuresO-RING SIZE 2-223
center_hole_diameter1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM IN
cross-sectional_height0.134 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationACTUATOR, 3" BALL VALVE
NSN5331-01-521-8991
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: EBV-S2-30-0002-18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.134 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.134 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
SPECIAL FEATURESO-RING SIZE 2-223
CENTER HOLE DIAMETER1.594 INCHES MINIMUM AND 1.624 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONACTUATOR, 3" BALL VALVE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
EBV-S2-30-0002 DET 18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy EBV-S2-30-0002-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EBV-S2-30-0002-18?
EBV-S2-30-0002-18 is a O-RING.
What parts can replace EBV-S2-30-0002-18?
There is 1 known substitute for EBV-S2-30-0002-18: EBV-S2-30-0002 DET 18. Substitute compatibility should be verified for your specific system.
What is the NSN for EBV-S2-30-0002-18?
EBV-S2-30-0002-18 is cataloged in the U.S. Government catalog under NSN 5331-01-521-8991. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EBV-S2-30-0002-18