PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E8T 0-11
E8T 0-11 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 8.00 MILLIMETERS NOMINAL MM, overall_width: 7.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4595, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E8T 0-11
NSN: 3110-00-156-4595
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter8.00 MILLIMETERS NOMINAL MM
overall_width7.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
overall_outside_diameter24.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data132 TYPE AND 50 GRADE
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
NSN3110-00-156-4595
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: E8T 0-11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
•
MATERIAL: STEEL BALL
•
NONDEFINITIVE SPEC/STD DATA: 132 TYPE AND 50 GRADE
•
BORE DIAMETER: 8.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
MATERIALSTEEL BALL
NONDEFINITIVE SPEC/STD DATA132 TYPE AND 50 GRADE
MATERIALCOPPER ALLOY RETAINER
MATERIALSTEEL INNER RING
MATERIALSTEEL INNER RING
BORE DIAMETER8.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER24.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH7.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
ND8N01Interchangeable
interchangeable cross-reference
interchangeable
9B8106Interchangeable
interchangeable cross-reference
interchangeable
98811Interchangeable
interchangeable cross-reference
interchangeable
SC600DELUXEInterchangeable
interchangeable cross-reference
interchangeable
3025K13Interchangeable
interchangeable cross-reference
interchangeable
NV-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy E8T 0-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E8T 0-11?
E8T 0-11 is a BEARING,BALL,ANNULAR.
What parts can replace E8T 0-11?
There are 20 known substitutes for E8T 0-11: ND8N01, 9B8106, 98811 and 17 more. Substitute compatibility should be verified for your specific system.
Is E8T 0-11 still available?
E8T 0-11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E8T 0-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026