PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E7-16
E7-16 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include phase: THREE INPUT, material: RUBBER SYNTHETIC TUBE, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, power_rating: 60.000 HORSEPOWER OUTPUT, overall_length: 6.000 INCHES NOMINAL IN, inside_diameter: 0.085 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-054-6351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E7-16
NSN: 4720-00-054-6351
FSC: 4720
CAGE: 30327 — IMPERIAL (USA)
SPECIFICATIONS
phaseTHREE INPUT
materialRUBBER SYNTHETIC TUBE
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
power_rating60.000 HORSEPOWER OUTPUT
overall_length6.000 INCHES NOMINAL IN
inside_diameter0.085 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
outside_diameter1.399 INCHES MINIMUM AND 1.461 INCHES MAXIMUM IN
special_featuresCOMPRESSED AIR FILTER ELEMENT
enclosure_featureOPEN AND DRIPPROOF PROTECTED-45 DEG
frequency_in_hertz60.0 INPUT
operating_pressure1125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NSN4720-00-054-6351
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: E7-16 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
BURST TEST PRESSURE: 4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MINIMUM INSIDE BENDING RADIUS: 11.000 INCHES IN
•
OPERATING PRESSURE: 1125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-13531 GOVERNMENT SPECIFICATION
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND B CLASS
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE
•
MATERIAL: RUBBER SYNTHETIC TUBE
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
BURST TEST PRESSURE4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MINIMUM INSIDE BENDING RADIUS11.000 INCHES IN
OPERATING PRESSURE1125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81349-MIL-H-13531 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA1 TYPE AND B CLASS
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE
MATERIALRUBBER SYNTHETIC TUBE
HYDROSTATIC TEST PRESSURE2250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
E716CGInterchangeable
interchangeable cross-reference
interchangeable
E716Interchangeable
interchangeable cross-reference
interchangeable
PIDODP60Interchangeable
interchangeable cross-reference
interchangeable
1XTY3Interchangeable
interchangeable cross-reference
interchangeable
MILH13531Interchangeable
Same NIIN cross-reference
interchangeable
MIL-DTL-13531Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E7-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E7-16?
E7-16 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace E7-16?
There are 6 known substitutes for E7-16: E716CG, E716, PIDODP60 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E7-16?
E7-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-054-6351. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E7-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026