PartsTable
Technical Data Sheet
Download PDF

E65243-5714-65 — E65243-5714-65

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

E65243-5714-65: E65243-5714-65.

The E65243-5714-65 is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 5331-01-456-6655, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E65243-5714-65
NSN: 5331-01-456-6655
FSC: 5331 — O-ring
CAGE: 72PR0 — THE O-RING STORE LLC (USA)
SPECIFICATIONS
Part NumberE65243-5714-65
NSN5331-01-456-6655
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E65243-5714-65 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-22050,GRADE 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 4.081 INCHES MINIMUM AND 4.137 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-22050,GRADE 1 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESSHELF LIFE IS W
CENTER HOLE DIAMETER4.081 INCHES MINIMUM AND 4.137 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
SUBSTITUTES & CROSS-REFERENCES 3
M22050-1-243Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-G-22050GRADE1SIZEAS568-243Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-22050Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy E65243-5714-65?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E65243-5714-65?
E65243-5714-65 is a E65243-5714-65.
What parts can replace E65243-5714-65?
There are 3 known substitutes for E65243-5714-65: M22050-1-243, MIL-G-22050GRADE1SIZEAS568-243, MIL-DTL-22050. Substitute compatibility should be verified for your specific system.
What is the NSN for E65243-5714-65?
E65243-5714-65 is cataloged in the U.S. Government catalog under NSN 5331-01-456-6655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E65243-5714-65

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.