PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E600A206
E600A206 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, overall_width: 4.312 INCHES NOMINAL IN, aperture_width: 3.562 INCHES NOMINAL IN, overall_length: 14.875 INCHES NOMINAL IN, aperture_length: 14.125 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-260-8208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E600A206
NSN: 5330-00-260-8208
FSC: 5330
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
materialCORK OVERALL
overall_width4.312 INCHES NOMINAL IN
aperture_width3.562 INCHES NOMINAL IN
overall_length14.875 INCHES NOMINAL IN
aperture_length14.125 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
inside_corner_radius0.781 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-260-8208
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E600A206 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE LENGTH: 14.125 INCHES NOMINAL IN
•
APERTURE WIDTH: 3.562 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.781 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL: CORK OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH14.125 INCHES NOMINAL IN
OVERALL WIDTH4.312 INCHES NOMINAL IN
APERTURE WIDTH3.562 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.781 INCHES NOMINAL IN
OVERALL LENGTH14.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORNON-CIRCULAR
MATERIALCORK OVERALL
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SCB614225Interchangeable
interchangeable cross-reference
interchangeable
38052Interchangeable
interchangeable cross-reference
interchangeable
30-224Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E600A206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E600A206?
E600A206 is a GASKET.
What parts can replace E600A206?
There are 3 known substitutes for E600A206: SCB614225, 38052, 30-224. Substitute compatibility should be verified for your specific system.
What is the NSN for E600A206?
E600A206 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-260-8208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E600A206

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026