PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E6-10-301-20
E6-10-301-20 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, knuckle_type: FRICTION, overall_length: 1.690 INCHES NOMINAL IN, performance_type: NOT RATED, pin_removability: NONREMOVABLE, special_features: ADJUSTABILITY OF DOOR SWING SPEED,HOLDING FEATURE INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-269-0978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E6-10-301-20
NSN: 5340-01-269-0978
FSC: 5340
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
knuckle_typeFRICTION
overall_length1.690 INCHES NOMINAL IN
knuckle_quantity2
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
special_featuresADJUSTABILITY OF DOOR SWING SPEED,HOLDING FEATURE INCLUDED
material_thickness0.130 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.164 INCHES NOMINAL IN
mounting_hole_quantity4
NSN5340-01-269-0978
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E6-10-301-20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE TYPE: FRICTION
•
MOUNTING HOLE DIAMETER: 0.164 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
MATERIAL: UNABLE TO DECODE
•
MOUNTING HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
KNUCKLE TYPEFRICTION
MOUNTING HOLE DIAMETER0.164 INCHES NOMINAL IN
SPECIAL FEATURESADJUSTABILITY OF DOOR SWING SPEED,HOLDING FEATURE INCLUDED
REVERSIBLE FEATURENOT INCLUDED
OVERALL LENGTH1.690 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
MATERIALUNABLE TO DECODE
MOUNTING HOLE QUANTITY4
KNUCKLE QUANTITY2
PIN CENTER TO BODY EDGE DISTANCE0.720 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
WG50082PC71Interchangeable
interchangeable cross-reference
interchangeable
43-1132Interchangeable
interchangeable cross-reference
interchangeable
480963SKInterchangeable
interchangeable cross-reference
interchangeable
15569Interchangeable
interchangeable cross-reference
interchangeable
NAS1556-09Interchangeable
interchangeable cross-reference
interchangeable
NAS1556-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E6-10-301-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E6-10-301-20?
E6-10-301-20 is a HINGE,BUTT.
What parts can replace E6-10-301-20?
There are 10 known substitutes for E6-10-301-20: WG50082PC71, 43-1132, 480963SK and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E6-10-301-20?
E6-10-301-20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-269-0978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E6-10-301-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026