PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E59030M
E59030M ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND STEEL CORROSION RESISTING OVERALL, overall_width: 2.500 INCHES NOMINAL IN, overall_length: 6.094 INCHES NOMINAL IN, cross-sectional_thickness: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, cross-sectional_shape_style: METAL AND METALLIC MATERIALS, center_to_center_distance_between_bolt_holes_along_length: 2.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-383-7350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E59030M
NSN: 5330-00-383-7350
FSC: 5330
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialASBESTOS AND STEEL CORROSION RESISTING OVERALL
overall_width2.500 INCHES NOMINAL IN
overall_length6.094 INCHES NOMINAL IN
cross-sectional_thickness0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL AND METALLIC MATERIALS
center_to_center_distance_between_bolt_holes_along_length2.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-383-7350
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E59030M MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND METALLIC MATERIALS
•
MATERIAL: ASBESTOS AND STEEL CORROSION RESISTING OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH2.500 INCHES NOMINAL IN
OVERALL LENGTH6.094 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND METALLIC MATERIALS
MATERIALASBESTOS AND STEEL CORROSION RESISTING OVERALL
CROSS-SECTIONAL THICKNESS0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
44027Interchangeable
interchangeable cross-reference
interchangeable
503-S 27/64Interchangeable
interchangeable cross-reference
interchangeable
575R753H09Interchangeable
interchangeable cross-reference
interchangeable
RFCS2-7Interchangeable
interchangeable cross-reference
interchangeable
2651953-10Interchangeable
interchangeable cross-reference
interchangeable
12127Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E59030M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E59030M?
E59030M is a GASKET.
What parts can replace E59030M?
There are 8 known substitutes for E59030M: 44027, 503-S 27/64, 575R753H09 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E59030M?
E59030M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-383-7350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E59030M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026