PartsTable
Technical Data Sheet
Download PDF

E50024-141 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

E50024-141: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: WOOL AND COTTON OVERALL, outside_diameter: 6.953 INCHES MINIMUM AND 7.015 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 5.875 INCHES MINIMUM AND 5.937 INCHES MAXIMUM IN, cross-sectional_thickness: 0.313 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-180-4694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E50024-141
NSN: 5330-00-180-4694
FSC: 5330 — Packing and Gasket Materials
CAGE: 25472 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
materialWOOL AND COTTON OVERALL
outside_diameter6.953 INCHES MINIMUM AND 7.015 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter5.875 INCHES MINIMUM AND 5.937 INCHES MAXIMUM IN
cross-sectional_thickness0.313 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-F-5656 TY 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-180-4694
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E50024-141 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.313 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-5656 TY 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 6.953 INCHES MINIMUM AND 7.015 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 5.875 INCHES MINIMUM AND 5.937 INCHES MAXIMUM IN
•
MATERIAL: WOOL AND COTTON OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.313 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-F-5656 TY 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER6.953 INCHES MINIMUM AND 7.015 INCHES MAXIMUM IN
APERTURE DIAMETER5.875 INCHES MINIMUM AND 5.937 INCHES MAXIMUM IN
MATERIALWOOL AND COTTON OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
277-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy E50024-141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E50024-141?
E50024-141 is a GASKET.
What parts can replace E50024-141?
There is 1 known substitute for E50024-141: 277-50. Substitute compatibility should be verified for your specific system.
What is the NSN for E50024-141?
E50024-141 is cataloged in the U.S. Government catalog under NSN 5330-00-180-4694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E50024-141