PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E4310PC1F
E4310PC1F ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER AND COTTON OVERALL, outside_diameter: 0.685 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.475 INCHES NOMINAL IN, cross-sectional_thickness: 0.060 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-580-4998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E4310PC1F
NSN: 5330-00-580-4998
FSC: 5330
CAGE: 33667 — KING ENGINEERING CORPORATION DBA KING-GAGE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER AND COTTON OVERALL
outside_diameter0.685 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.475 INCHES NOMINAL IN
cross-sectional_thickness0.060 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-580-4998
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E4310PC1F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.685 INCHES NOMINAL IN
•
MATERIAL: RUBBER AND COTTON OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.475 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.685 INCHES NOMINAL IN
MATERIALRUBBER AND COTTON OVERALL
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER0.475 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
7029Interchangeable
interchangeable cross-reference
interchangeable
1276304Interchangeable
interchangeable cross-reference
interchangeable
5010582-00Interchangeable
interchangeable cross-reference
interchangeable
N7029FInterchangeable
interchangeable cross-reference
interchangeable
6665NCM104677Interchangeable
interchangeable cross-reference
interchangeable
17629Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E4310PC1F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E4310PC1F?
E4310PC1F is a GASKET.
What parts can replace E4310PC1F?
There are 7 known substitutes for E4310PC1F: 7029, 1276304, 5010582-00 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E4310PC1F?
E4310PC1F is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-580-4998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E4310PC1F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026