PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E332-5187-5
E332-5187-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE OVERALL, seal_width: 0.410 INCHES NOMINAL IN, housing_bore_diameter: 6.705 INCHES NOMINAL IN, accommodated_shaft_diameter: 5.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-415-4709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E332-5187-5
NSN: 5330-01-415-4709
FSC: 5330
CAGE: 81782 — ALMON JOHNSON LTD (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE OVERALL
seal_width0.410 INCHES NOMINAL IN
housing_bore_diameter6.705 INCHES NOMINAL IN
accommodated_shaft_diameter5.875 INCHES NOMINAL IN
NSN5330-01-415-4709
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E332-5187-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 6.705 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 5.875 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE NITRILE OVERALL
•
SEAL WIDTH: 0.410 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER6.705 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER5.875 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE NITRILE OVERALL
SEAL WIDTH0.410 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
401500Interchangeable
interchangeable cross-reference
interchangeable
4-425-3Interchangeable
interchangeable cross-reference
interchangeable
481.500Interchangeable
interchangeable cross-reference
interchangeable
401.500Interchangeable
interchangeable cross-reference
interchangeable
V-150AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E332-5187-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E332-5187-5?
E332-5187-5 is a SEAL,PLAIN.
What parts can replace E332-5187-5?
There are 5 known substitutes for E332-5187-5: 401500, 4-425-3, 481.500 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E332-5187-5?
E332-5187-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-415-4709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E332-5187-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026