PartsTable
Technical Data Sheet
Download PDF

E24405 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

E24405: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OR COPPER ALLOY OVERALL, nut_style: SLEEVE, nut_length: 0.075 INCHES NOMINAL IN, thread_class: 2B, boss_diameter: 0.276 INCHES MINIMUM AND 0.281 INCHES MAXIMUM FIRST END IN, thread_series: UNS. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-150-3911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E24405
NSN: 5310-00-150-3911
FSC: 5310 — Nuts and Washers
CAGE: C5810 — DRAGER SAFETY AG & CO. KGAA (DEU)
SPECIFICATIONS
materialCOPPER ALLOY 360 OR COPPER ALLOY OVERALL
nut_styleSLEEVE
nut_length0.075 INCHES NOMINAL IN
thread_class2B
boss_diameter0.276 INCHES MINIMUM AND 0.281 INCHES MAXIMUM FIRST END IN
thread_seriesUNS
boss_thickness0.032 INCHES NOMINAL SINGLE END IN
thread_directionRIGHT-HAND
nominal_thread_size10.000 INCHES IN
cross-sectional_shapeROUND BOSS
nut_width_across_flats0.312 INCHES NOMINAL IN
thread_quantity_per_inch48
NSN5310-00-150-3911
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: E24405 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.075 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
NUT WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR ECL 88 1/2 HARD,FSCM 99251 MFR REF 2ND MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 10.000 INCHES IN
•
BOSS THICKNESS: 0.032 INCHES NOMINAL SINGLE END IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.075 INCHES NOMINAL IN
THREAD SERIESUNS
NUT WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR ECL 88 1/2 HARD,FSCM 99251 MFR REF 2ND MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE10.000 INCHES IN
BOSS THICKNESS0.032 INCHES NOMINAL SINGLE END IN
BOSS THICKNESS0.018 INCHES MINIMUM OVERALL IN
BOSS THICKNESS0.021 INCHES MAXIMUM BASE IN
CROSS-SECTIONAL SHAPEROUND BOSS
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy E24405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E24405?
E24405 is a NUT,SLEEVE.
What is the NSN for E24405?
E24405 is cataloged in the U.S. Government catalog under NSN 5310-00-150-3911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E24405