PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E2250PC83
E2250PC83 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 32.500 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 30.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-275-3466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E2250PC83
NSN: 5330-00-275-3466
FSC: 5330
CAGE: 18027 — DIXIE MFG CO INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter32.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter30.500 INCHES NOMINAL IN
cross-sectional_thickness0.750 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-275-3466
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E2250PC83 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.750 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 32.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
APERTURE DIAMETER: 30.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.750 INCHES NOMINAL IN
OUTSIDE DIAMETER32.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
APERTURE DIAMETER30.500 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
101A905U01Interchangeable
interchangeable cross-reference
interchangeable
AS568-017Interchangeable
interchangeable cross-reference
interchangeable
A6689.017.303Interchangeable
interchangeable cross-reference
interchangeable
PRP568-113-4200-70Interchangeable
interchangeable cross-reference
interchangeable
CI-0113Interchangeable
interchangeable cross-reference
interchangeable
13-0617-13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E2250PC83?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E2250PC83?
E2250PC83 is a GASKET.
What parts can replace E2250PC83?
There are 13 known substitutes for E2250PC83: 101A905U01, AS568-017, A6689.017.303 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E2250PC83?
E2250PC83 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-275-3466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E2250PC83

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026