PartsTable
Technical Data Sheet
PartsTable / MRO / E2-6
E2-6 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include current_rating_for_which_designed: 1940.0 MILLIAMPERES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ E2-6
NSN: 3110-00-100-8546
FSC: 3110
CAGE: 00658 — ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY (USA)
SPECIFICATIONS
current_rating_for_which_designed1940.0 MILLIAMPERES NOMINAL
NSN3110-00-100-8546
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: E2-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
OVERALL OUTSIDE DIAMETER: 3.3337 INCHES MINIMUM AND 3.3537 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL OUTSIDE DIAMETER3.3337 INCHES MINIMUM AND 3.3537 INCHES MAXIMUM IN
OVERALL HEIGHT0.8075 INCHES MINIMUM AND 0.8175 INCHES MAXIMUM IN
SURFACE FINISHGROUND
SPECIAL FEATURESBANDED OD
ALIGNMENT TYPERIGID
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
E26Interchangeable
interchangeable cross-reference
interchangeable
5940PL1333477Interchangeable
interchangeable cross-reference
interchangeable
364703Interchangeable
interchangeable cross-reference
interchangeable
D-356-10Interchangeable
interchangeable cross-reference
interchangeable
EMM308Interchangeable
interchangeable cross-reference
interchangeable
F26-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E2-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E2-6?
E2-6 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace E2-6?
There are 23 known substitutes for E2-6: E26, 5940PL1333477, 364703 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E2-6?
E2-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E2-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026