PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E19AETN
E19AETN ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.6300 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN, overall_width: 0.8125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: WITH OIL HOLE, BANDED O.D. AND 19 - 3/8 IN.

BALLS; OUTSIDE DIAMETER 2.9588 MIN.AND 2.9788 MAX. IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-463-5936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E19AETN
NSN: 3110-01-463-5936
FSC: 3110
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.6300 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN
overall_width0.8125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresWITH OIL HOLE, BANDED O.D. AND 19 - 3/8 IN. BALLS; OUTSIDE DIAMETER 2.9588 MIN.AND 2.9788 MAX. IN
standard_tolerance_designationABEC NO.1
thrust_directional_capability_designationSINGLE
NSN3110-01-463-5936
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: E19AETN · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 1.6300 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
SPECIAL FEATURESWITH OIL HOLE, BANDED O.D. AND 19 - 3/8 IN. BALLS; OUTSIDE DIAMETER 2.9588 MIN.AND 2.9788 MAX. IN
OVERALL WIDTH0.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER1.6300 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
157063-1Interchangeable
interchangeable cross-reference
interchangeable
FB19Interchangeable
interchangeable cross-reference
interchangeable
E19Interchangeable
interchangeable cross-reference
interchangeable
8107A052Interchangeable
interchangeable cross-reference
interchangeable
87-0434Interchangeable
interchangeable cross-reference
interchangeable
1504Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E19AETN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E19AETN?
E19AETN is a BEARING,BALL,THRUST.
What parts can replace E19AETN?
There are 13 known substitutes for E19AETN: 157063-1, FB19, E19 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E19AETN?
E19AETN is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-463-5936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E19AETN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026