PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E15090
E15090 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 1.1670 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES INTERMEDIATE LAYER, hardness_rating: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL, special_features: DRILL ONE HOLE CENTER OD BODY 3/8 IN.BY 3/16 IN.DEEP USE FLAT BOTTOM DRILL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-954-0019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E15090
NSN: 3120-00-954-0019
FSC: 3120
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length1.1670 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES INTERMEDIATE LAYER
hardness_rating23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
special_featuresDRILL ONE HOLE CENTER OD BODY 3/8 IN.BY 3/16 IN.DEEP USE FLAT BOTTOM DRILL IN
style_designatorSOLID, EXTERNAL FLANGES BOTH ENDS
left_flange_width0.2500 INCHES NOMINAL IN
right_flange_width0.2500 INCHES NOMINAL IN
body_inside_diameter2.0460 INCHES MINIMUM AND 2.0620 INCHES MAXIMUM IN
body_outside_diameter2.6210 INCHES MINIMUM AND 2.6230 INCHES MAXIMUM IN
left_flange_outside_diameter2.8440 INCHES MINIMUM AND 2.8600 INCHES MAXIMUM IN
NSN3120-00-954-0019
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: E15090 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGES BOTH ENDS
•
BODY OUTSIDE DIAMETER: 2.6210 INCHES MINIMUM AND 2.6230 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 416 OVERALL
•
SURFACE FINISH: 125.0 MICROINCHES INTERMEDIATE LAYER
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
LEFT FLANGE WIDTH: 0.2500 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 2.0460 INCHES MINIMUM AND 2.0620 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSOLID, EXTERNAL FLANGES BOTH ENDS
BODY OUTSIDE DIAMETER2.6210 INCHES MINIMUM AND 2.6230 INCHES MAXIMUM IN
MATERIALSTEEL COMP 416 OVERALL
SURFACE FINISH125.0 MICROINCHES INTERMEDIATE LAYER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
LEFT FLANGE WIDTH0.2500 INCHES NOMINAL IN
BODY INSIDE DIAMETER2.0460 INCHES MINIMUM AND 2.0620 INCHES MAXIMUM IN
LEFT FLANGE OUTSIDE DIAMETER2.8440 INCHES MINIMUM AND 2.8600 INCHES MAXIMUM IN
RIGHT FLANGE OUTSIDE DIAMETER2.8440 INCHES MINIMUM AND 2.8600 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
BS6Interchangeable
interchangeable cross-reference
interchangeable
10668Interchangeable
interchangeable cross-reference
interchangeable
BS6AInterchangeable
interchangeable cross-reference
interchangeable
PA20397/2110 ITEM 124Interchangeable
interchangeable cross-reference
interchangeable
15-0046000-33Interchangeable
Same NIIN cross-reference
interchangeable
R1104PC33Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E15090?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E15090?
E15090 is a BUSHING,SLEEVE.
What parts can replace E15090?
There are 6 known substitutes for E15090: BS6, 10668, BS6A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E15090?
E15090 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-954-0019. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E15090

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026