PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E125-155
E125-155 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.245 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN, screw_material: IRON ALLOY 660, fastener_length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-159-9593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E125-155
NSN: 5305-00-159-9593
FSC: 5305
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.245 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
screw_materialIRON ALLOY 660
fastener_length0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-159-9593
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: E125-155 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 40
•
SCREW MATERIAL: IRON ALLOY 660
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 0.245 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
THREAD QUANTITY PER INCH40
SCREW MATERIALIRON ALLOY 660
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH0.245 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
7-802-000001Interchangeable
interchangeable cross-reference
interchangeable
12A0702Interchangeable
interchangeable cross-reference
interchangeable
374750Interchangeable
interchangeable cross-reference
interchangeable
9145-155Interchangeable
Same NIIN cross-reference
interchangeable
965813-155CInterchangeable
Same NIIN cross-reference
interchangeable
10125022Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E125-155?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E125-155?
E125-155 is a SCREW,MACHINE.
What parts can replace E125-155?
There are 6 known substitutes for E125-155: 7-802-000001, 12A0702, 374750 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E125-155?
E125-155 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-159-9593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E125-155

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026