PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E1224-7-10
E1224-7-10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

NUT ASSEMBLY,SELF-LOCKING,GANG C. Key specifications include material: STEEL NUT, nut_spacing: 0.820 INCHES NOMINAL IN, thread_class: 2B, channel_style: STRAIGHT TYPE, overall_width: 0.640 INCHES NOMINAL IN, thread_series: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-090-4731, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1224-7-10
NSN: 5310-00-090-4731
FSC: 5310
CAGE: 30463 — DCX-CHOL ENTERPRISES, INC. (USA)
SPECIFICATIONS
materialSTEEL NUT
nut_spacing0.820 INCHES NOMINAL IN
nut_quantity2
thread_class2B
channel_styleSTRAIGHT TYPE
overall_width0.640 INCHES NOMINAL IN
thread_seriesUNF
overall_length1.260 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL EXCEPT INSERT
nominal_thread_size0.190 INCHES IN
NSN5310-00-090-4731
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: E1224-7-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
CHANNEL STYLE: STRAIGHT TYPE
•
THREAD SERIES: UNF
•
THREAD CLASS: 2B
•
NUT QUANTITY: 2
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
OVERALL WIDTH0.640 INCHES NOMINAL IN
CHANNEL STYLESTRAIGHT TYPE
THREAD SERIESUNF
THREAD CLASS2B
NUT QUANTITY2
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.190 INCHES IN
MATERIALSTEEL NUT
NUT SPACING0.820 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
H8025Interchangeable
interchangeable cross-reference
interchangeable
471771Interchangeable
interchangeable cross-reference
interchangeable
37665Interchangeable
interchangeable cross-reference
interchangeable
P-S-411Interchangeable
interchangeable cross-reference
interchangeable
FC-37665Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1224-7-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1224-7-10?
E1224-7-10 is a NUT ASSEMBLY,SELF-LOCKING,GANG C.
What parts can replace E1224-7-10?
There are 5 known substitutes for E1224-7-10: H8025, 471771, 37665 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E1224-7-10?
E1224-7-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-090-4731. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1224-7-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026