PartsTable
Technical Data Sheet
Download PDF

E1211126 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

E1211126: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: SQUARE, second_end_style: SQUARE, style_designator: SHOULDER, first_step_length: 0.313 INCHES NOMINAL IN, third_step_length: 0.315 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-525-5530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1211126
NSN: 5315-01-525-5530
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A01PJ
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleSQUARE
second_end_styleSQUARE
style_designatorSHOULDER
first_step_length0.313 INCHES NOMINAL IN
third_step_length0.315 INCHES NOMINAL IN
first_end_locationSMALL END
second_step_length0.330 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
first_step_diameter0.469 INCHES NOMINAL IN
third_step_diameter0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
second_step_diameter0.312 INCHES NOMINAL IN
end_item_identificationLW155 HOWITZER
NSN5315-01-525-5530
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: E1211126 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.469 INCHES NOMINAL IN
•
FIRST END LOCATION: SMALL END
•
THIRD STEP DIAMETER: 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
•
FIRST END STYLE: SQUARE
•
SECOND STEP LENGTH: 0.330 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDER
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND STEP DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST STEP DIAMETER0.469 INCHES NOMINAL IN
FIRST END LOCATIONSMALL END
THIRD STEP DIAMETER0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
FIRST END STYLESQUARE
SECOND STEP LENGTH0.330 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDER
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND STEP DIAMETER0.312 INCHES NOMINAL IN
FIRST STEP LENGTH0.313 INCHES NOMINAL IN
SECOND END STYLESQUARE
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
777.21.025Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy E1211126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1211126?
E1211126 is a PIN,SHOULDER,HEADLESS.
What parts can replace E1211126?
There is 1 known substitute for E1211126: 777.21.025. Substitute compatibility should be verified for your specific system.
What is the NSN for E1211126?
E1211126 is cataloged in the U.S. Government catalog under NSN 5315-01-525-5530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1211126