PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E1175-3-1
E1175-3-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 6150 OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.234 INCHES NOMINAL IN, thread_class: 3A A, hole_diameter: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-9635, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1175-3-1
NSN: 5306-00-207-9635
FSC: 5306
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 6150 OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.234 INCHES NOMINAL IN
thread_class3A A
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity6
thread_length0.562 INCHES MINIMUM IN
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
surface_treatmentCADMIUM OVERALL
NSN5306-00-207-9635
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: E1175-3-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 6150 OVERALL
•
HEAD HEIGHT: 0.234 INCHES NOMINAL IN
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL IN
•
THREAD CLASS: 3A A
•
THREAD LENGTH: 0.562 INCHES MINIMUM IN
•
HEAD STYLE: HEXAGON
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS,6448 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 6150 OVERALL
HEAD HEIGHT0.234 INCHES NOMINAL IN
HOLE CONFIGURATION STYLEHEXAGON FLATS
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL IN
THREAD CLASS3A A
THREAD LENGTH0.562 INCHES MINIMUM IN
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS,6448 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD QUANTITY PER INCH18
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
18193Upgraded Successor
successor cross-reference
successor
23660Upgraded Successor
successor cross-reference
successor
HOLLISTER INCORPORATEDUpgraded Successor
successor cross-reference
successor
22649Interchangeable
interchangeable cross-reference
interchangeable
35313Interchangeable
interchangeable cross-reference
interchangeable
22-1427Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1175-3-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1175-3-1?
E1175-3-1 is a BOLT,MACHINE.
What parts can replace E1175-3-1?
There are 9 known substitutes for E1175-3-1: 18193, 23660, HOLLISTER INCORPORATED and 6 more. Substitute compatibility should be verified for your specific system.
Is E1175-3-1 still available?
E1175-3-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1175-3-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026