PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E1104PC
E1104PC ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 0.7870 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1104PC
NSN: 3110-00-157-0332
FSC: 3110
CAGE: 12736 — CLAYTON MANUFACTURING COMPANY (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width0.7870 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
inner_ring_width19.00 MILLIMETERS NOMINAL MM
outer_ring_width0.6300 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
NSN3110-00-157-0332
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: E1104PC · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
•
SEAL QUANTITY: 1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
OUTER RING WIDTH: 0.6300 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
SEAL QUANTITY1
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
OUTER RING WIDTH0.6300 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3545 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
6536Interchangeable
interchangeable cross-reference
interchangeable
1417Interchangeable
interchangeable cross-reference
interchangeable
7309DBInterchangeable
interchangeable cross-reference
interchangeable
7309BGY2Interchangeable
interchangeable cross-reference
interchangeable
7309BEGBYInterchangeable
interchangeable cross-reference
interchangeable
P13002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1104PC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1104PC?
E1104PC is a BEARING,BALL,ANNULAR.
What parts can replace E1104PC?
There are 19 known substitutes for E1104PC: 6536, 1417, 7309DB and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E1104PC?
E1104PC is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1104PC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026