PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E1072D004PC16
E1072D004PC16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.468 INCHES NOMINAL IN, housing_bore_diameter: 4.501 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-7127, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1072D004PC16
NSN: 5330-00-086-7127
FSC: 5330
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.468 INCHES NOMINAL IN
housing_bore_diameter4.501 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-086-7127
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E1072D004PC16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 4.501 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.468 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER4.501 INCHES NOMINAL IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.468 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
30090Interchangeable
interchangeable cross-reference
interchangeable
C-1100-5-7Interchangeable
interchangeable cross-reference
interchangeable
C1100-7Interchangeable
interchangeable cross-reference
interchangeable
60996Interchangeable
interchangeable cross-reference
interchangeable
2132700-1Interchangeable
interchangeable cross-reference
interchangeable
D60996Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1072D004PC16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1072D004PC16?
E1072D004PC16 is a SEAL,PLAIN ENCASED.
What parts can replace E1072D004PC16?
There are 14 known substitutes for E1072D004PC16: 30090, C-1100-5-7, C1100-7 and 11 more. Substitute compatibility should be verified for your specific system.
Is E1072D004PC16 still available?
E1072D004PC16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1072D004PC16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026