PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E1036-43-1
E1036-43-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.228 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 0.630 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-508-5409, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1036-43-1
NSN: 5340-00-508-5409
FSC: 5340
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
diameter0.228 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
overall_width0.630 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter0.520 INCHES NOMINAL IN
material_document_and_classificationMS5042 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.900 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end0.810 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-00-508-5409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E1036-43-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MS5042 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: STEEL COMP 1010 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.900 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.630 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMS5042 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIALSTEEL COMP 1010 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END0.900 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
LOOP INSIDE DIAMETER0.520 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
3771-1625Interchangeable
interchangeable cross-reference
interchangeable
23161Interchangeable
interchangeable cross-reference
interchangeable
69316Interchangeable
interchangeable cross-reference
interchangeable
05026Interchangeable
interchangeable cross-reference
interchangeable
87166Interchangeable
interchangeable cross-reference
interchangeable
AE8178Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1036-43-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1036-43-1?
E1036-43-1 is a CLAMP,LOOP.
What parts can replace E1036-43-1?
There are 11 known substitutes for E1036-43-1: 3771-1625, 23161, 69316 and 8 more. Substitute compatibility should be verified for your specific system.
Is E1036-43-1 still available?
E1036-43-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1036-43-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026