PartsTable
Technical Data Sheet
Download PDF

E10080-3 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

E10080-3: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.188 INCHES NOMINAL IN, temp_rating: 450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-8456, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E10080-3
NSN: 5310-00-010-8456
NIINs: 000108456, 014208886
FSC: 5310 — Nuts and Washers
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.188 INCHES NOMINAL IN
temp_rating450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
special_featuresDYED BROWN
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
NSN5310-00-010-8456
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: E10080-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 63.0 MICROINCHES
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5735 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5737 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL NUT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
BEARING SURFACE FINISH63.0 MICROINCHES
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5735 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5737 ASSN STD 2ND MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
NUT STYLESLOTTED, HEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 2
MS9363-09Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
10116493Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy E10080-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E10080-3?
E10080-3 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace E10080-3?
There are 2 known substitutes for E10080-3: MS9363-09, 10116493. Substitute compatibility should be verified for your specific system.
What is the NSN for E10080-3?
E10080-3 is cataloged in the U.S. Government catalog under NSN 5310-00-010-8456. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E10080-3