PartsTable
Technical Data Sheet
Download PDF

E10-23171-1 — RESTRICTOR,FLUID FLOW

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

E10-23171-1: RESTRICTOR,FLUID FLOW.

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include length: 0.250 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, design_type: TUBULAR, HEX SHAPE, orifice_diameter: 0.040 INCHES NOMINAL IN, outside_diameter: 0.500 INCHES NOMINAL IN, thread_provision: THREADED LOCATION NOT OTHERWISE SPECIFIED. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-530-7218, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E10-23171-1
NSN: 4730-01-530-7218
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96547 — FLEET READINESS CENTER SOUTHEAST DIV NAVY (USA)
SPECIFICATIONS
length0.250 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
design_typeTUBULAR, HEX SHAPE
orifice_diameter0.040 INCHES NOMINAL IN
outside_diameter0.500 INCHES NOMINAL IN
thread_provisionTHREADED LOCATION NOT OTHERWISE SPECIFIED
surface_treatmentPASSIVATE
end_item_identificationF/A-18 E/F HORNET AIRCRAFT
NSN4730-01-530-7218
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: E10-23171-1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD PROVISION: THREADED LOCATION NOT OTHERWISE SPECIFIED
•
DESIGN TYPE: TUBULAR, HEX SHAPE
•
OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: STEEL CORROSION RESISTING
•
ORIFICE DIAMETER: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.250 INCHES NOMINAL IN
THREAD PROVISIONTHREADED LOCATION NOT OTHERWISE SPECIFIED
DESIGN TYPETUBULAR, HEX SHAPE
OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
END ITEM IDENTIFICATIONF/A-18 E/F HORNET AIRCRAFT
MATERIALSTEEL CORROSION RESISTING
ORIFICE DIAMETER0.040 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
E10-23171Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy E10-23171-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E10-23171-1?
E10-23171-1 is a RESTRICTOR,FLUID FLOW.
What parts can replace E10-23171-1?
There is 1 known substitute for E10-23171-1: E10-23171. Substitute compatibility should be verified for your specific system.
What is the NSN for E10-23171-1?
E10-23171-1 is cataloged in the U.S. Government catalog under NSN 4730-01-530-7218. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E10-23171-1