PartsTable
Technical Data Sheet
E1-9 ✓ Verified by PartsTable
AG Neovo · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Exceptionally elegant exterior<br>- Stylish rear side design<br>- Swift 4ms response time<br>- Crisp 700 contrast ratio<br>- NeoV Optical GlassTM<br>- Built-in speakers with headphone jack<br>- Auto-adjustment for optimal setting<br>- Intuitive OSD with key lock function<br>- Kensington security socket<br>- VESA standard wall mount This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-6714, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1-9
NSN: 3110-00-156-6714
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
base_styleSINGLE CONTACT BAYONET CANDELABRA
body_width1.594 INCHES NOMINAL IN
bore_shapeSTRAIGHT
bulb_styleS (STRAIGHT SIDE)
body_height2.062 INCHES NOMINAL IN
body_length1.594 INCHES NOMINAL IN
bore_diameter1.6300 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN
overall_width0.8125 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
turn_quantity5050 SINGLE COMPONENT SINGLE WINDING
alignment_typeRIGID
NSN3110-00-156-6714
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: E1-9 · AG Neovo ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL OVERALL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
SURFACE FINISH: GROUND
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
LOAD DIRECTION: RADIAL
NONDEFINITIVE SPEC/STD DATA: 132GR00 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
NONDEFINITIVE SPEC/STD DATA132GR00 TYPE
MATERIALSTEEL OVERALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, MAGNETO TYPE, S EPARABLE
NONDEFINITIVE SPEC/STD DATA132GR00 TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
169 1492Interchangeable
interchangeable cross-reference
interchangeable
FARMERS REDUCERInterchangeable
interchangeable cross-reference
interchangeable
E19Interchangeable
interchangeable cross-reference
interchangeable
8107A052Interchangeable
interchangeable cross-reference
interchangeable
87-0434Interchangeable
interchangeable cross-reference
interchangeable
1504Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1-9?
E1-9 is a BEARING,BALL,ANNULAR manufactured by AG Neovo.
What parts can replace E1-9?
There are 20 known substitutes for E1-9: 169 1492, FARMERS REDUCER, E19 and 17 more. Substitute compatibility should be verified for your specific system.
Is E1-9 still available?
E1-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1-9