PartsTable
Technical Data Sheet
Download PDF

E0603 3-912 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

E0603 3-912: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material_document_and_classification: E0603 MFR REF SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-505-3354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E0603 3-912
NSN: 5331-01-505-3354
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
material_document_and_classificationE0603 MFR REF SINGLE MATERIAL RESPONSE
NSN5331-01-505-3354
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E0603 3-912 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: E0603 MFR REF SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONE0603 MFR REF SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
SUBSTITUTES & CROSS-REFERENCES 2
3-912 E603-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
151705Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy E0603 3-912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E0603 3-912?
E0603 3-912 is a O-RING.
What parts can replace E0603 3-912?
There are 2 known substitutes for E0603 3-912: 3-912 E603-70, 151705. Substitute compatibility should be verified for your specific system.
What is the NSN for E0603 3-912?
E0603 3-912 is cataloged in the U.S. Government catalog under NSN 5331-01-505-3354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E0603 3-912