PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E0515 2-212
E0515 2-212 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN, center_hole_diameter: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-124-2063, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E0515 2-212
NSN: 5330-01-124-2063
FSC: 5330
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER OVERALL
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
center_hole_diameter0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING
cross_section_inside_diameter0.875 INCHES NOMINAL IN
cross_section_outside_diameter1.125 INCHES NOMINAL IN
NSN5330-01-124-2063
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E0515 2-212 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL: RUBBER OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
PERIPHERAL DIAMETER: 1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS SECTION INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
PERIPHERAL DIAMETER1.119 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS SECTION INSIDE DIAMETER0.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.849 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
02704CPInterchangeable
interchangeable cross-reference
interchangeable
ARP568-212E515-8CPInterchangeable
interchangeable cross-reference
interchangeable
528P203Interchangeable
interchangeable cross-reference
interchangeable
00296Interchangeable
interchangeable cross-reference
interchangeable
2-212E515-8Interchangeable
interchangeable cross-reference
interchangeable
2-212 E515-80Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E0515 2-212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E0515 2-212?
E0515 2-212 is a PACKING,PREFORMED.
What parts can replace E0515 2-212?
There are 10 known substitutes for E0515 2-212: 02704CP, ARP568-212E515-8CP, 528P203 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E0515 2-212?
E0515 2-212 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-124-2063. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E0515 2-212

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026