PartsTable
Technical Data Sheet
Download PDF

E0515 2-134 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

E0515 2-134: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN, center_hole_diameter: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-465-6688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E0515 2-134
NSN: 5331-00-465-6688
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM
outside_diameter2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
center_hole_diameter1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationE515-8,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-00-465-6688
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E0515 2-134 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: E515-8,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
TEMP RATING400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONE515-8,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 6
22-38625 PC10CPReference document
Same NSN cross-reference
Reference document — Secondary reference
22-38625 PC10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
E0515 2-134CPReference document
Same NSN cross-reference
Reference document — Secondary reference
C3178-134Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
2-134E515-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
22-38625Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy E0515 2-134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E0515 2-134?
E0515 2-134 is a O-RING.
What parts can replace E0515 2-134?
There are 6 known substitutes for E0515 2-134: 22-38625 PC10CP, 22-38625 PC10, E0515 2-134CP and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E0515 2-134?
E0515 2-134 is cataloged in the U.S. Government catalog under NSN 5331-00-465-6688. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E0515 2-134

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.